Tuesday, July 2, 2013

You call this FAST TRACK......

If anyone can find the last month please let me know.  I really don't know where time goes but I hope it is having a really good experience!!!

On to our next ornament.  This one is Merry.  I love the little lacy edge along the bottom.  If you have decided to do your ornaments in more traditional colors you might want to edge this one in lace.

Finishing Directions:

First measure, add 1/8 inch on all sides, cut forms from the chipboard and attach quilt batting to one side of each board.



Center stitching on one board and backing fabric to the other.  When gluing try and keep the glue about 1/4 inch from the edge as it is no fun dragging your needle thru dried glue when you sew the two sides together.


Place front to back and slip stitch around the edges.  Leave 3/4 inch open at the center top.


Knot your cording to form hanging loop.  Begin by placing the cord end (the one closest to the knot) into the opening.  Glue or stitch cording around the ornament returning to the opening.  Let glue dry, TAPE cording, and then slip cord end into the opening.


Another ornament finished and ready to hang.  


Next ornament will be Wait til Dec. 25!   You will need a toilet paper roll... Just like kindergarten and I promise we will have fun!

We need to get these finished up so we all can begin stitching Lizzie*Kate's new Mystery Christmas Sampler....it is going to be wonderful.

Thursday, June 6, 2013

Finally a post!

Oklahoma...where the wind comes sweepin' down the plains...

Sorry about the long absence but we have had a really hectic spring.  Things are getting back to normal for my family...and we are very thankful.

Now back to our regularly scheduled finishing....!!!

I collect snowmen so this has to be my favorite Jingle....and since he is my favorite I am now going to let you in on a secret.  One of my favorite finishing tools is the PRINTER!!!  I absolutely can not live without my printer when making ornaments.  It is great to make a few copies of the completed stitching and "audition" different shapes and techniques. 



Using your copy measure and decide how big to make your triangle.  I left about 1/8 inch at the top and bottom and just "connected the dots".  After you are happy with the results use the printer copy as a template to cut the chipboard.  Slightly round the corners so they don't poke thru the linen.


Cover front side of the chipboard with low loft quilt batting and trim flush with the outside edges.


 
 
Center and attach the linen to the shape....HINT...do the corners first.  It is really helpful on triangles.  Glue and tape all sides.



I used mini ball trim around the outside edge of the front.  You can glue...messy but doable or slip stitch trim in place. 



Make a hanger with a 4 inch length of twisted cord.  Fold in half and tape/glue to center top of the backside of the triangle.


Glue/slipstitch onto a piece of Weeks Dye Work wool or felt.  Trim leaving about 1/4 inch on all three sides.  I used my rotary cutter....it is wonderful but pinking shears will work also.  Make sure to fold hanging loop out of the way when trimming the top edge...I DO speak from experience!


Add a bow and trim with a tiny jingle bell...glue or stitch in place at the end of the triangle.


Linda has announced the release of the next three Jingles....I will try and "fast track' the next two in this set.  I really appreciate all the kind comments.

Happy Finishing,
Mona

Thursday, April 25, 2013

Summer Finishing Frenzy....

Here is the picture of the "simplified" Uncle Sam project....as you can see I really did my best to make him quick and easy to stitch.




We are going to have so much fun this summer....don't stress the stitching as the main focus will be on the finishing techniques.  Contact me if you have any questions.

Happy Finishing,
Mona

Thursday, April 18, 2013

Sewing Box.....Camp Wannasew Project

This is a project that we recently did at the Spring Camp Wannasew.  Several campers did not get finished so I said I would post the directions on my blog.  This technique can be used for any size box....here goes.

This is the box we used....


Cut a piece of chipboard the same size as the bottom of the box.  You might have to trim until you get a good fit....round of the corners slightly for the candy box.  Cover the chipboard with a layer of low loft quilt batting and trim to fit.  Then cover with matching fabric.


We selected several motifs that came in the tin...in addition to the yummy candy.  Angie chose to do a long thin motif for the scissor keep.  Decide how much linen you want to show on the front and fold into a long tube.  I slip stitched the top and bottom together for form a flat tube...added two buttons and fringed the ends.  This is the back.

Now a picture of the front.

The second motif is going to be attached to felted wool.  Decide how much linen you want to show on the front and mark the measurement on all four sides.

Fold back the edges, trim leaving about 1/2 inch all around and attach to the wool with matching thread.

Trim the wool using pinking shears or a rotary cutter with pinking blade---they are wonderful and well worth the price.

The next piece was trimmed, fringed and attached to the wool with beads, or buttons.

Now you have three pieces...you can play around with them until you get a pleasing arrangement.
 
Slip your scissors into the scissor loop and you have a great sewing box.  Enjoy!

Tuesday, April 16, 2013

I'm Back........


Well, every vacation has to come to an end...now it is back to our daily routine.  I don't know about you but I am very comforted by routine. 

Ornament #3....Ruched Ribbon

You will need:
Chipboard
Low Loft Quilt Batting
Backing Fabric
Twisted Cord
Pins
Beads--I used 10/0 red beads
Peppermint Ribbon--from the scrapbook area at Hobby Lobby

By now you know the routine--measure and add 3/8 inch to width and height.  Pad one side of the front and back with the batting. 


Cover the back with backing fabric and center the stitching on the front.  Tape/glue twisted cord hanger to the back.  Then sew front and back together.



Now the fun part--start by getting your supplies together--ribbon, pins and beads.


 
 

Pick up a bead on the pin and then "sew" the pin thru every other peppermint.  Be sure to catch the top and bottom edge of the ribbon.  Start the sewing about 8 peppermints from the end of the ribbon.


Start at the bottom of the ornament.  The first pin will be place in the middle of the 4th stitched peppermint from the right along the bottom--second middle of the 5th.  Third pin will be place at the bottom right corner.  The goal is for the pin to be placed between the two layers of chipboard---be careful!!!  Pins are sharp and can poke out on the front or back of the cardboard.

The long sides can be marked for pin placement--about every 1/2 to 3/4 inch.  Sometimes you have to coax the ribbon to show the peppermint...I used a chop stick to urge it into place. 


Once you get the hang of it just continue around the ornament...ir really helps to have the bead/pins already sewn to the ribbon.



Around to the second loop on the left bottom---now bring the two ends together and tie a square knot...I managed to have a peppermint in the middle....you can too.


Thursday I am going to publish a camp project...It uses a Whitman 100th Anniversary Tin.  I know most of you were not there but you can enjoy the pictures...enjoy!!



Monday, April 8, 2013

Where's Mona???

Hi...thought I would let you know the next ornament will be posted on or after Tax Day

Right now I am very busy being very lazy. We are on a Hawaiian Cruise with 30+ happy stitchers. This is truly a beautiful time in paradise

Expect to hear from me next week
Aloha



Monday, March 11, 2013

Box Ornament--Ho Ho Ho

1.  Measure length and width of completed stitching--add 3/8 inch to each measurement.

2.  Cut two pieces of chip board using these measurements--one will used for the stitching and one for the back of the box.  Cover one side of each with low loft quilt batting.  Center stitching on the front and cover the back with coordinating cotton fabric.

3.  Cut side pieces same length as the front and 1.25 inches wide--cut two.  Cut top and bottom pieces same width as the front and 1.25 inches wide--cut two.  You should have two sides, one top and one bottom.  Tape outside pieces together in this order side-top-side-bottom. 

4.  Cut fabric 1 inch wider and longer than the taped together outside pieces.  Glue fabric edges to the back of the unit.  Miter corners to keep the bulk away from the edges.

5.  Glue rick rack on top of fabric. 

6.  Bring ends of the outside unit together and slip stitch the fabric ends together--catch just the fabric not the chip board.

7.  Use a couple of pins to position the back on top of the outside unit...slip stitch back to the edge of the unit...again just catching the fabric not the chip board.

8.  Repeat process with the front--leave 3/4 inch un-stitched in the lower left edge.  You will use the opening to insert the twisted cord ends.

9.  Use fabric glue to attach twisted cord around the front of the box.  Use a skewer to help open up the hole and poke the cord end into the opening.  Glue in a clockwise direction returning to the opening.  Let glue dry completely before  slipping in the cord end.

10.  Attach bow to top of the ornament with hot glue....yeah two done and only 10 more to go!!!

The Pocket

Next comes the pocket....remember  your pocket can be any shape you want.  What we did is just a suggestion. Look at the template and you ...